MR16 Low Voltage
High Voltage
Par 64 High Voltage
Product Features
Otterbine's latest edition to their Fountain Glo™ light systems, the Par 64 offers impressive illumination for our larger patterns in the Large Aerating Fountain and Giant Fountain lines.
Each system consists of two lights which are mounted to the outside perimeter of the float producing 38,800 lumens per set, with bulb life exceeding 4000 hours. Manufactured of nickel-plated copper and naval brass with stainless steel hardware, the system is corrosive resistant in both fresh water and saltwater applications.
Fountain Glo™ Par 64 High Voltage Light Features Include:
- Corrosion Resistant:
Manufactured from non-corrosive stainless steel and naval brass components these lights are able to operate in brackish and effluent conditions. - Thermal Protection:
Thermal cut-off feature in light fixture prevents overheating, while an electric interlock relay prevents lights from being energized when the aerator/fountain is not in operation. - Extended Life:
Bulb life exceeds 4000+ hours. - Comprehensive Warranty:
Complete 1-year warranty on lights, transformer, cable and power control center*. - Accessories:
All light sets come standard with a timer and gfci when purchased with a panel, optional accessories include photocell and cable quick disconnect. - Safety Listed & Protected:
Fountain Glo Par 64 lights are electrically safety tested and listed with ETL, ETL-C.
*Power control center is not a standard item on 50Hz packages.
Product Specifications: Par 64 High Voltage Light Systems
Below are the product specifications for the Fountain Glo Par 64 Light Systems. These light systems operate off of 115V and are only available for 60Hz markets. For further assistance or to answer your questions please contact your local Otterbine distributor or Otterbine direct.
| Lights (1000W) per Set | 2 |
| Junction Box | 1 |
| Amp Draw (Total) | 17.6 |
| Lamp Wattage (Total) | 2000 |
| Candlepower (Total Lumens) | 38,800 |
PDF Downloads: Specification Form | Sale Sheet
Product Installation
The remarkable illumination provided by the Fountain Glo Par 64 High Voltage Light Systems, highlights our most impressive patterns in the Large Aerating Fountain and Giant Fountain lines. Depending on the aeration or fountain system selected, you will be provided mounting brackets that attach the lights to the float. All light fixtures come fully assembled, so installation simply requires mounting the transformer, attaching the lights to the float with the brackets provided, and connecting the power. Once installed, adjust the angle of the light fixtures for the effect you desire. Complete installation instructions will be found within the owner’s manual which will be provided with the delivery of the product.
Additional Considerations When Ordering and Installing Fountain Glo™ MR16 Light Systems:
- If you plan to add lights to an aeration or fountain system after initial purchase, a separate power control center will be needed. However if at the time you place the aeration/fountain system order you know there are plans to add lights sometime in the future a larger panel can be built to accommodate the forthcoming light controls.
- Par 64 light fixtures must be fully submerged 1in or 2.5cm below the water surface at all times when energized.
Warranty
The Fountain Glo Par 64 High Voltage Lights carry a complete 1 year warranty. This warranty extends to the complete package including light housings, cable, transformer and power control center.Warranty and service can be performed by more than 100 factory trained and certified Otterbine Service Centers found worldwide, or by Otterbine directly. A copy of the warranty statement for this product can be found within the owner?s manual.
Maintenance
Light fixture is designed for years of dependable service. Periodically clean the bezel glass lens of any debris and check the power cords for any damage. Always disconnect power from the light when performing maintenance.
